MV President Eisenhower. File Photo: MarineTraffic.com/Bar Pilot
An incorrectly installed section of main engine fuel oil return tubing led to an engine room fire aboard a containership off the coast of Santa Barbara, California, the National Transportation Safety Board said Tuesday.
The fire aboard the M/V President Eisenhower broke out April 28, 2021 as the ship transited through the Santa Barbara Channel on a voyage to Oakland, California with a crew of 22.
The crew extinguished the fire using the engine room’s fixed carbon dioxide fire-extinguishing system. As a result of the fire, the vessel lost propulsion and drifted for several hours before being towed to the Port of Los Angeles. We were tracking the ship as it drifted towards shore and was subsequently rescued by a tug.
No pollution or injuries were reported, but damage to the vessel totaled an estimated $8.22 million.
Marine Investigation Report 22/15 details the NTSB’s investigation of the incident.
A crewmember on watch noticed smoke coming from an open engine room hatch early in the morning on April 28. Two crewmembers donned firefighter outfits and attempted to use portable fire extinguishers to quell the fire. Realizing the fire was “too much,” the captain decided to release carbon dioxide into the engine room.
The day before the vessel’s departure, the second engineer installed a new section of steel fuel oil return tubing for the main engine. A post fire examination showed that a compression fitting on the end of the newly installed section of fuel return tubing had disconnected, causing the ultra-low sulfur diesel fuel oil the engine was burning to spray. CCTV footage from the vessel showed diesel oil spray about 30 minutes before the fire started. Within one minute after the fire started, cardboard and wooden boxes of spare parts, which were stored one deck above the main engine and next to the auxiliary boiler, caught on fire.
Investigators found that an unshielded and uninsulated exhaust valve compensator flange acted as an ignition source for the spraying diesel fuel. An examination of the disconnected fuel oil return tubing and failed compression fitting revealed that the compression fitting’s sealing ferrule was not sufficiently swaged to the steel tubing.
The NTSB determined the probable cause of the engine room fire was a crewmember insufficiently swaging a compression fitting ferrule during the installation of fuel oil return tubing for a main engine’s cylinder, allowing an end of the tubing to disconnect and spray fuel oil onto a nearby unshielded and uninsulated cylinder exhaust component.
NTSB further identified two lessons learned from this investigation:
Marine Investigation Report 22/15 can be found on the NTSB website.
Join the 82,715 members that receive our newsletter.
Have a news tip? Let us know.
A ship captain has been charged in Australia for his alleged role in a drug smuggling operation at the Port of Hedland. If convicted, he could face life in prison....
By Natalia Drozdiak and Rosalind Mathieson (Bloomberg) — Support is growing in Europe to send warships to the Black Sea to escort freighters carrying Ukrainian grain, as the world worries about...
Last week, the New York maritime scene had National Maritime Day (on May 22) celebratory event that included the annual International Maritime Hall of Fame awards dinner, hosted by the...
Get the latest gCaptain articles and breaking news
Get the latest gCaptain articles and breaking news
The Leader in Maritime and Offshore News
For general inquiries and to contact us, please email: [email protected]
To submit a story idea or contact our editors, please email: [email protected]
Enter your email and get some awesome stuff every week