ASME B16.36/16.5 A105 A182 forged weld neck orifice flange with Jack screw
| Name | FORGED STEEL FLANGES | ||||
| Type | WN(welding neck);SO(slip on);PL(Plate);BL(Blind);Th(Threaded);SW(scket welding);LF/SE(lapped flange/stub end);LWN(long welding neck);Orifice flange;Reducing flange;API flange;Integral/Compact flange;Spectacle blind,spade and spacer,Paddle blind,Paddle spacer; | ||||
| Production Size | 1/2''~120'' | ||||
| Face | RF(raised face);FF(flat face);RTJ(ring type joint);TG(tongue and groove face);MFF(male and female face) | ||||
| Standard | ANSI: ANSI B16.5, ANSI B16.47, ANSI B16.48, ANSI B16.36, ASME B16.5, API 6B, 6BX, BS4504 - 3.1, API608 - 81, ASMEB16.36; JIS B2220; DIN: DIN2630, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2501 (WN); DN2573, 2576, 2527, 2655, 2656 (PL); DIN2566 (TH) | ||||
Specifications :
Flange Type:
Weld Neck, Slip On, Blind, Plate, Thread, Socket Weld, Lap Joint, Ring Joint, Orifice Flange, Spectacle Blind, Paddle Spacer and Blank Flange, Figure 8 Flange, etc;
Face: Raised Face (RF),Flat Face(FF), Ring Joint (RTJ)
Material:
Carbon Steel: Q235,20#,A105, ST37.2,C22.8, S235JR,P250GH,A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
Stainless Steel: A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
Ally Steel: A182 F1,F5/a,F9,F11,F12,F22,F91
Duplex Steel: A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
Special Alloy: ,C95400,C95500,C95800,Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
Standard:
ASME: ANSI/ASME B 16.5,ASME B16.36,ASME B16.47 Series A(MSS SP-44);ASME B16.47 Series B(API 605),AWWA C207
DIN: Plate(DIN2573,2576,2502),Blind(DIN2527),Loose(DIN2641-2676),Welding-Neck (DIN2627-2638), Threaded (DIN2565 2566 2567) ,Slip-On (DIN86029 86030)
EN: EN1092-1
JIS: JIS B2220
UNI: UNI2253-2278,UNI6083,UNI6084,UNI2280,UNI2281-2286, UNI6091-6097
GOST: GOST12820-80, GOST12821-80
BS: BS 4504,BS10-1962,BS3293-1960
Pressure:
ANSI:Class 75, Class 150, Class 300, Class 600, Class 900, Class 1500, Class 2500
DIN:PN 6,PN 10,PN 16,PN 25,PN 40
EN:PN 6,PN 10,PN 16,PN 25,PN 40
JIS:1K,2K,5K,10K,16K,20K,30K,40K,63K ;
GOST:PN 6,PN 10,PN 16,PN 25,PN 40,PN63,PN100,PN160
BS:TABLE D E
Machining Tolerance: From 0.005mm-0.01mm-0.1mm As Standard.
Machined Surface Quality: Ra 0.8-Ra3.2 according to customer requirements
Production Process:
Forging-Heat Treatment-Machining (rough machining and finish machining)-Drilling-Inspect-Stamp-Packing
Heat Treatment: Solution, N+T (Normalizing + Tempering), Q+T (Quenching + Tempering)
Surface Treatment
Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized.
Usage:
Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.
