S34778/S34700/(X6CrNiNb18-10)Polished Bright Surface Plate
1.Product DescriptionStainless steel is a steel alloy with a minimum of 10.5% chromium content, as well as certain Ni, Mo, Mn, Cu, N contents etc.
Stainless steel does not readily corrode, rust or stain with water. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion and blocks corrosion from spreading into the metal.
Plate thickness 0.2mm~100mm
Standard plate zise 1000*2000mm,1219*2440mm,1500*6000mm,1800*6000mm,2000*6000mm
Coil thickness 0.3mm~3mm
Coil width 1m, 1.22m, 1.5m, 1.8m, 2m, 2.6m
Length 2000mm, 2440mm(8feet), 2500mm, 3000mm, 3048mm(10feet), 5800mm, 6000mm,as customer's requirements
Materials 303se,304,TP304,TP304L,305,306,309S,310S,310H, TP316,TP316L,316Ti,317,317L,317Ti,321,SUS321,347,SUS347,440C,440F,C-276,Ni80Cr20,Ti,630,631,632,XM7,329JI,2205,2207,S32750,S32550,S32154,S32183, 904L,ect.
Minimum order 1 Ton
Standards ASTM A511 A269 A312 A213, GB/ T14976-2002 GB 13296-91
FOB price the latest price
Surface polish, primary colour,matt,mirror face ,wire drawing
Certification ISO,SGS
Application chemical industry, metallurgy, construction, water conservancy
Production requirement cold drawing, cold rolling, precision rolling
Physical and chemical properties:
High oxidation resistance in air at ambient temperature;
Highly resistant to attack from acids, bases, organics;
High resistance to stress corrosion cracking;
High resistance to general corrosion, pitting corrosion, crevice corrosion, erosion corrosion and corrosion fatigue;
High mechanical strength.
Stainless steel plate maintenance:
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
Chemical composition
| Grade | C | Si | Mn | P | S | Ni | Cr |
| AISI 201 | <=0.15 | <=1.00 | 5.5-7.5 | <=0.060 | <=0.03 | <=3.50-5.50 | <=16.00-18.00 |
| AISI 202 | <=0.15 | <=1.00 | 7.5-10.0 | <=0.060 | <=0.03 | <=4.0-6.0 | <=17.00-19.00 |
| AISI 304 | <=0.07 | <=1.00 | <=2.00 | <=0.045 | <=0.03 | <=8.00-10.5 | <=18.00-20.00 |
| AISI 316L | <=0.03 | <=1.00 | <=2.00 | <=0.045 | <=0.03 | <=12.00-15.00 | <=16.00-18.00 |
| AISI 309S | <=0.08 | <=1.00 | <=2.0 | <=0.045 | <=0.03 | <=12.00-15.00 | <=22.00-24.00 |
| AISI 310S | <=0.08 | <=1.00 | <=2.00 | <=0.045 | <=0.03 | <=19.00-22.00 | <=24.00-26.00 |
| AISI 321 | <=0.08 | <=1.00 | <=2.00 | <=0.045 | <=0.03 | <=9.00-13.00 | <=17.00-19.00 |
| AISI 409L | <=0.08 | <=1.00 | <=1.00 | <=0.045 | <=0.03 | <=0.50 | <=10.50-17.50 |
| AISI 430 | <=0.12 | <=0.75 | <=1.00 | <=0.040 | <=0.03 | <=0.60 | <=16.00-18.00 |
| AISI 436L | <=0.025 | <=16.00-19.00 | |||||
| AISI 439 | <=0.03 | <=1.00 | <=1.00 | <=0.040 | <=0.03 | <=0.50 | <=17.00-19.00 |
| AISI 441 | <=0.015 | <=1.00 | <=1.00 | <=0.040 | <=0.03 | <=0.30 | <=17.50-19.00 |
| AISI 444 | <=0.025 | <=1.00 | <=1.00 | <=0.040 | <=0.03 | <=1.00 | <=17.50-19.50 |
Mechanical property
| YIELD STRENGTH | TENSILE STRENGTH | EXTENSION | HARDNESS | |||
| N/mm2 | N/mm2 | % | HRB | HV | HB | |
| AISI 201 | >=270 | >=520 | >=40 | <=100 | <=253 | <=241 |
| AISI 202 | >=245 | >=590 | >=40 | <=95 | <=218 | <=207 |
| AISI 304 | >=205 | >=520 | >=40 | <=90 | <=200 | <=187 |
| AISI 316L | >=175 | >=480 | >=40 | <=90 | <=200 | <=187 |
| AISI 309S | >=205 | >=520 | >=40 | <=90 | <=200 | <=187 |
| AISI 310S | >= 205 | >=520 | >=40 | <=90 | <=200 | <=187 |
| AISI 321 | >=205 | >=520 | >=40 | <=90 | <=200 | <=187 |
| AISI 409L | >=175 | >=360 | >=25 | <=80 | <=175 | <=162 |
| AISI 430 | >=205 | >=450 | >=22 | <=88 | <=200 | <=183 |
| AISI 439 | >=245 | >=410 | >=20 | <=96 | <=230 | <=217 |
| AISI 441 | >=302 | >=495 | >=35 | <=96 | <=170 | <=217 |
| AISI 444 | >=245 | >=410 | >=20 | <=96 | <=230 | <=217 |
Packaging & Shipping
| PackagingDetails: | Products are well packed and clear labeled according to the regulations and customer's requests. |
| Delivery Detail: | 7-15days after receiving deposit |
Our Services
Pre-sale Service
1. Sample can be offered with sample charge and courier fee by buyer's side.
2. We have full stock,and can deliver within short time.Many styles for your choices.
3. OEM and ODM order are accepted, Any kind of logo printing or design are available.
4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade
team, you can totally believe our service.
6. We have 8 year experience of design, manufacture and sell lingerie, we cherish every order from our honor.
After you choose
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment.
3. Email you the tracking no, and help to chase the parcels until it arrive you.
After-sale choose
1. We are very glad that customer give us some suggestion for price and products.
2. If any question,please contact with us freely by E-mail or Telephone.
FAQ
1. If we travel to China to checking your facility, are you welcome?
Of course, why not ? we will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport, living in our company's hotel, and driving by car take you visiting our company. Warm Welcome!
2. How many sales person in your team?
present 8 sales, but more hands help in work, total team is 20+ workers. So do not worry, not the one person company.
3. How Many Years of your company working in this industry?
We are 20+ years, from last century. Expanding the market, and cultivate our techniques, two ways all in work together.
4. Could you show me some photos of your producing working?
here, following is our working plant, all is same when you come to China to audit.
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com